Crystal Guard Chrono Armor - Clean & seal your wrist watches with real crystal glass for a rich glosses and robust protections. Crystal Guard chemical was originally invented in Japan as a paint sealant product for automobiles. Now it’s carefully optimized for your wrist watches and you can use it on any materials such as stainless steel, gold, platinum, titanium, carbon, plastic, or glass, and even on any gems such as diamond, ruby, sapphire or crystal. You can use it for daily cleaning of your wrist watches at the same time adding more surface protections to them.
Crystal Guard Chrono Armor creates a micro thin crystal glass layer on surfaces of your wrist watches for more glosses and protections. “100% gloss retention” of the layer is certified by the Japanese national standard weather-ability test JIS K 2396, which means the layer never wears out permanently unless you scrape it. No detergent component used and the special dispersing agent cleans your wrist watches entirely without harming them. Now you can clean and protect your wrist watches at the same time.
More you apply it, classier the gloss develops and stronger the protection builds up by creating a strong, flat and yet only micro thin crystal glass layer bonded on the surface with a pencil hardness of 9H.
Both of the sealant and the cleaning components can be use for a daily cleaning on any materials of your wrist watches without compromising the qualities.
Instructions
1. Shake the bottle of Crystal Guard Chrono Armor well before use.
2. Spray the solution 4 or 5 times on a microfiber cloth.
3. Spread the solution all over your wrist watch.
4. Wipe off grease and the residue at the same time with a dry part of the microfiber cloth.
Cautions
1. Do not put any pressure when you wipe the surface.
2. Sealant layer won’t build up on the materials which absorb the soliton, such as fabrics and leather.
3. You see the result immediately after the application but it takes up to 24 hours for the crystal glass layer to stabilize.
4. If you see some white dullness on the surface after an application, the residue easily comes off by wiping it gently with a microfiber cloth, possibly with a bit of water.
Clean and seal your wrist watches
Crystal Guard chemical was originally invented in Japan as a paint sealant product for automobiles. Now it’s carefully optimized for your wrist watches and you can use it on any materials such as stainless steel, gold, platinum, titanium, carbon, plastic, or glass, and even on any gems such as diamond, ruby, sapphire or crystal.
You can use it for daily cleaning of your wrist watches at the same time adding more surface protections to them.
Crystal glass layer with 100% gloss retention
Crystal Guard Chrono Armor creates a micro thin crystal glass layer on surfaces of your wrist watches for more glosses and protections. “100% gloss retention” of the layer is certified by the Japanese national standard weather-ability test JIS K 2396, which means the layer never wears out permanently unless you scrape it.
No oil nor resin contained as it never oxidizes nor rusts one the surface of your wrist watches. Real crystal glass brings your watch much classier gloss and glitter instead of greasy glares.
Take care of your watches with the safe cleaning agent
No detergent component used in Crystal Guard Chrono Armor and the special dispersing agent in it cleans your wrist watches entirely without harming them. Now you can clean and protect your wrist watches at the same time.
Once you start cleaning your watches with it, the surface will repel dust, grease and fingerprints, and even if some of those leave on the surface, you can easily remove them by just wiping with a microfiber cloth.
Crystal Glass graded pencil hardness 9H
Crystal Guard Chrono Armor builds a real crystal glass layer with a pencil hardness of 9H, also certified by the Japanese standard surface hardness test JIS K 2396, to protect your wrist watches from certain levels of scratches.
It exerts the protection capability especially on soft metals such as gold and platinum, and you get less chances to get them scratched. Keep your watches as beautiful as possible starting today.
Multiple applications provide better gloss and values.
By using Crystal Guard Chrono Armor for daily cleaning, the micro thin crystal glass layer builds up as a much flatter and stronger layer at nano level.
Multiple applications never provide inelegant glitters, nor lower the values of your wrist watches. More you apply it, richer the glosses develop and stronger the protections build up and help you to keep the values higher for your wrist watches.
Safe components
The sealant components of Crystal Guard Chrono Armor is rated to be “safe to your skin” by the EPA certified environment tests in the United States, and have minimum impacts on your skin. That is why it can be used and applied on your wrist watches with bare hands without gloves.
We also use no detergent in the cleaning components not to compromise any waterproof seals of your wrist watches. It’s totally a safe cleaner + a sealant for your daily cleaning.
[10:38 am, 03/12/2020] Ltde Mobile: https://www.chronopassion.com/watches/crystal-guard/1088/crystal-guard
[10:38 am, 03/12/2020] Ltde Mobile: Short description: Crystal Guard Chrono Armor - Clean & seal your wrist watches with real crystal glass for a rich glosses and robust protections.
Crystal Guard chemical was originally invented in Japan as a paint sealant product for automobiles. Now it’s carefully optimized for your wrist watches and you can use it on any materials such as stainless steel, gold, platinum, titanium, carbon, plastic, or glass, and even on any gems such as diamond, ruby, sapphire or crystal. You can use it for daily cleaning of your wrist watches at the same time adding more surface protections to them.
Measuring 39mm across and with a height of 12.25mm, the case of the Le Régulateur Louis Erard x Sylvie Fleury Palette of Shadows watch is
A formidable synthesis of technical acumen and outstanding artisanship, the Bernhard Lederer Central Impulse Chronometer InVerto watch is a triumph for its maker, and a
Recreating a ‘lost’ calibre, Tutima have completely redesigned the UROFA Calibre 59 that once powered their Fliegerchronograph watches from the 1940s and in doing so,
The case is of the Carl Suchy Belvedere Champagne is manufactured from stainless steel, and has a diameter of 40.8mm and a height of 12.2mm